Tuesday, July 17, 2018
Thursday, May 3, 2018
Friendlyarm Nanopi Neo2 Starter system.
This is a nice enclosed metal case quad core Allwinner H5 processor.
This is a photo of the unit in visible light, then photos of the unit from various angles in IR with a Flir Pro camera.
Unit
http://www.friendlyarm.com/index.php?route=product/product&product_id=190
Neo 2
http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO2
-30-
This is a photo of the unit in visible light, then photos of the unit from various angles in IR with a Flir Pro camera.
Unit
http://www.friendlyarm.com/index.php?route=product/product&product_id=190
Neo 2
http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO2
![]() | |
| 81 degrees |
![]() |
| 84.8 degrees |
![]() |
| 88.8 degrees |
![]() | |
| 90.3 degrees |
![]() |
| 91 degrees |
-30-
Labels:
arm,
flir,
friendlyarm,
neo2,
small system,
temperature
Wednesday, March 21, 2018
Basic Four board set
This seems to be a 16 bit Basic Four processor set. It's in unusable condition (most likely), and hopefully will yield up the firmware at least.
The possibility it being a 16 bit superset of the 1600 is due to it having 4 74181 ALU chips. It was designed just shy of the advent of the 2901, which I believe was the next step in the Basic Four / MAI designs of CPUs.
There are 4 total boards in the scrap set, one with the firmware (Intel mask roms), the board with the 74181's (probably the Data board) one with a lot of logic, and a final one with two large connectors out the back (maybe a path to control panel)?
Will have to see if anyone has more Basic Four information.
Firmware chips.
The possibility it being a 16 bit superset of the 1600 is due to it having 4 74181 ALU chips. It was designed just shy of the advent of the 2901, which I believe was the next step in the Basic Four / MAI designs of CPUs.
There are 4 total boards in the scrap set, one with the firmware (Intel mask roms), the board with the 74181's (probably the Data board) one with a lot of logic, and a final one with two large connectors out the back (maybe a path to control panel)?
Will have to see if anyone has more Basic Four information.
Firmware chips.
DPS 8 system test attachment. Possibly Multics
This was found in a gold scrap listing, and sadly isn't much more useful than that. However it does have references in the DPS8 manual.
http://bitsavers.org/pdf/honeywell/dps-8/58010048-500_System_Installation_Manual_jun86.pdf
Also on Archive.org with OCR. I didn't find an OCR'd version on bitsavers.
https://archive.org/details/bitsavers_honeywelldmInstallationManualjun86_9284781
![]() |
| Front View PSIA NSAJB board |
![]() | ||
| back of the test board. |
![]() | ||||
| HIS symbol on board |
Monday, December 11, 2017
Data General Eclipse front panel
This is a nice buy off of Ebay. It happens to use the same plastic casting as the Nova 3 front panel bezel (of which there are three in stock).
It didn't say which model, but I'm suspecting S-120 or such unless corrected.
Also the seller nicely left the key with it, or didn't notice it, so there is a genuine (I'm guessing) DG key. I had just gotten a replacement Ace for the Nova 1200s, so now have keys for all of the ones with key on / off.
It didn't say which model, but I'm suspecting S-120 or such unless corrected.
Also the seller nicely left the key with it, or didn't notice it, so there is a genuine (I'm guessing) DG key. I had just gotten a replacement Ace for the Nova 1200s, so now have keys for all of the ones with key on / off.
![]() |
| Key is in this bag |
Sunday, December 10, 2017
Perkin Elmer 36 inch F8
Perkin Elmer 36" F/8 lens.
K38 Shutter by Fairchild
Back Focus 18.052"
FF 21.461
The following is from an Ebay auction
for a full lens assembly
Here for comparison is a Perkin Elmer
36" F/4 lens from an SR71 camera
Minc 11 system
This will be the repository for photos and documentation links for the Minc11 system, documentation, and software.
Photos for now.
Subscribe to:
Posts (Atom)
































































































